Controls; Diagram Of The Control Panel; Method Of Use; Functional Check - Whirlpool ENTRY BASIC Instructions D'utilisation Et D'entretien

5 CONTROLS

Diagram of the control panel

6 METHOD OF USE

Functional check

Before switching the oven on check:
•
You have removed the protective film, if provided;
•
The plug is properly inserted into the power supply wall socket;
•
That the system supply voltage, frequency and power are compatible with the values provided on the label affixed
on the right side of the oven;

Switching on the oven for the first time

The first time the appliance is used it is recommended to heat the oven when empty to eliminate bad smells caused by the
evaporation of moisture content of the refractory stones, in the insulating material and the metallic parts inside.
Follow the procedure below:
•
leave the oven working (empty) for at least 8 hours at the temperature of 150° before proceeding to the first baking.
1. Comand label;
2. Cooking chamber light
switch ;
3. Analogic thermometer;
4. Top thermostat;
5. Pilot light TOP;
6. Bottom thermostat;
7. Pilot light thermostat;
Graduation Temperature (°C)
0
1
2
3
4
5
6
7
8
9
10
23
0
80
100
150
200
250
280
300
350
400
450