Num'axes SL1008 Guide D'utilisation page 59

setting.
•
The Minutes digits will be blinking.
•
Press the [UP] or [DN] button to increase or decrease the
minute value (00 – 59).
•
Press [OK] to save your selection and enter the Month
setting.
•
The Month digits will be blinking.
•
Press the [UP] or [DN] button to increase or decrease the
Month value (1 – 12).
•
Press [OK] to save your selection and enter the Day
setting.
•
The Day digits will be blinking.
•
Press the [UP] or [DN] button to increase or decrease the
Day value (01 – 31).
•
Press [OK] to confirm the Date setting and enter the Year
setting.
•
The Year digits will be blinking.
•
Press the [UP] or [DN] button to increase or decrease the
Year value (01 – 99).
•
Press [OK] to confirm the Year setting. You'll then see the
word "- dEL –" blinking on the status screen.
•
Press the [M] button to exit the Manual programming
mode and go back to the status screen.
Setting the Time Lapse Mode (TLM)
In Time Lapse mode, the camera will take photos automatically
59/80