Num'axes SL1008 Guide D'utilisation page 48

•
•
D: indicates the camera is in Date setting.
•
T: indicates the camera is in Time setting.
•
T-O: indicates the camera is in Time Out setting.
Time Out in PIR mode: length of time that the camera will
"wait" until it responds to any additional triggers from the
PIR after an animal is first detected and remains within
the sensor's range.
Time Out in Time Lapse mode: interval between two still
images.
During Time Out (PIR or Time Lapse), the camera will not
capture photos/videos. This prevents the SD card from
filling up many redundant images.
•
PIR: indicates the camera is in PIR detection Mode (the
camera will take photos or videos when it is triggered by
the PIR sensor's detection of activity in the area it covers)
•
TLS: indicates the camera is in Time Lapse Mode (the
camera will take photos automatically at your choice of
intervals during one block of time you set up)
: indicates the still image/video resolutions.
Image resolution is 12Mp
Image resolution is 5Mp
or video resolution is HD 1280 x 720 pixels
Image resolution is 3Mp
or video resolution is VGA 640 x 480 pixels
48/80