Inserting The Sd Card - Num'axes SL1008 Guide D'utilisation

inserted, the status display will indicate "NOSd" and the camera
will not operate.
When the SD card's memory capacity is full, the LCD display
indicates "FULL". The camera will stop taking images or videos.

Inserting the SD card

•
Open the cover, and insert the SD card in the SD card slot
completely and oriented correctly as shown by the icon
above the slot.
•
To remove the SD memory card, depress the SD card and
pull out the card gently.
•
SD cards must be clean (no images from other sources). If
the SD card has been used in another device, please make
sure to format the SD card in your computer prior to use
in your camera. New cards are ready to use straight from
the package.
FORMAT – Definition: When you format a SD memory card, the
operating system erases all information and files on the card.
Then it creates an internal address tables that it later uses to
locate information and files. Formatting also removes all Hidden
System files as well. Basically it cleans your SD memory card just
like if it was brand new. DO NOT USE File System type: "NTFS" or
"exFAT", these formats are not supported.
52/80