Battery And Memory Installation - Num'axes SL1008 Guide D'utilisation

Battery and Memory Installation

Your camera is designed to operate using two different types of
power options.
NOTE: be sure the camera is in the OFF position before
inserting or removing SD cards or batteries.
"AA" Batteries
The internal battery tray accepts 8 "AA" batteries. Be sure to
use high quality alkaline batteries (you can purchase NUM'AXES
batteries from NUM'AXES or from your distributor). Install the
batteries with correct polarity (+/-) as noted inside the battery
tray.
12V DC external power
The camera is equipped with an external power jack designed to
accept a barrel plug cable of DC 12V adaptor or battery pack
(not supplied).
•
Make sure camera is in the OFF position.
•
Insert the barrel plug of external AC to DC power adaptor
or battery pack into the DC 12V port on the bottom of
camera housing.
•
Sliding the switch to SET or A or B or MANUAL from OFF.
Memory Options
The camera is also equipped with an expandable media card slot
capable of accepting up to 32GB SD card with Class 10 or below
speed rating (not supplied). The status display will show the
number of images stored on the SD card. If no SD card is
51/80