Tips On Energy Saving; Service Programmes - Bosch TES 515 Série Mode D'emploi

Masquer les pouces Voir aussi pour TES 515 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
en
● Remove the cover (5f) of the brewing unit
and rinse the brewing unit (5a) thoroughly
under running water.
● Thoroughly clean the brewing unit sieve
under the running water.
Important: Do not clean with detergent or
other cleaning agents and do not put it in
the dishwasher.
● Wipe out the inside of the appliance
thoroughly with a damp cloth and remove
any coffee residues.
● Allow the brewing unit (5a) and the inside
of the appliance to dry.
● Replace the cover (5f) on the brewing unit
and reinsert the brewing unit (5a) fully
into the appliance.
● Press the eject lever (5d) up fully.
● Slide the red lock (5e) fully to the right
and close the door (5b).

Tips on energy saving

● Switch off the fully automatic espresso
machine when not in use. To do this,
press the k off / i button (13). The
appliance rinses and switches off.
● If possible, do not interrupt coffee or milk
froth dispensing. Cutting the coffee or milk
froth dispensing process short results in
higher energy consumption and in more
residual water collecting in the drip tray.
● Descale the appliance regularly to avoid
a build-up of limescale. Limescale residue
results in higher energy consumption.

Service Programmes

Tip: Refer also to the quick reference guide
in the storage compartment (5c).
Depending on usage, the following
messages will appear on the display at
certain intervals:
Descale required!
or
Clean required!
or
Calc'n'Clean required!
The appliance should be cleaned or
descaled immediately using the corre-
sponding programme. You also have the
option of combining both processes with the
Calc'n'Clean function (see "Calc'n'Clean").
If the service programme is not run as
instructed, the appliance may be damaged.
15
TES515.. | 7/2014

Publicité

Table des Matières
loading

Table des Matières