Manual Recording; Schedule Recording; Video Playback; Video Edit - König Electronic SEC-DVR504 Mode D'emploi

Manual recording:

Manual recording is useful for the times when you want to immediately record an event. To turn on
manual recording, select Toolbar → Manual Record or press the REC button on the front panel or on
the remote control. A red dot will appear on the screen. To turn off the manual recording, press the REC
button again.
Note: this option only works when the DVR is not already recording.

Schedule recording:

It allows you to create a schedule for recording tasks throughout the week, so that only certain selected
events will be recorded.
CHANNEL: You can select one, two or all channels.
There are three modes for recording: Motion Detection record,
NORMAL record and NO RECORD.
Different colours signify different recording modes: Orange means
MD record, green means normal record and grey means no record.
First select a colour cell below the screen. Then select a cell on the
desired day. With the copy function, you can copy a setting to all
days or a selected day.
After completing the schedule, click on to activate the setting.
Note: Option I/O is not applicable for this model.

Video playback:

Select Toolbar → Play to enter the Playback menu.
Method 1: Playback by date
Date input: Adjust the date and time to match the recording you are
searching for. Select "TIME" and click on Enter to directly insert
numbers to set the year, month and date. Now insert the time in the
next field and click on ►.
The following window will automatically appear. Select the channel
of the video you want to play and click on ►. If only one channel is
selected, the video from that channel will be displayed in full-screen
mode. If two or more channels are selected, the videos from the
selected channels will be displayed simultaneously over four frames.
Method 2: Playback by recording status
Insert the date, click search and you can see the recording status of this date.

Video edit:

During the playback, choose the channel that you want to edit, click the button in the playback
control panel, and this icon will change to . When you want to end the editing, click the button ,
and it will change to .
11