Emptying The Water Tank; General Cleaning; Air Filter Cleaning - ProBreeze PB-AC02 Mode D'emploi

Emptying The Water Tank

The water tank should be emptied after every
use.
To empty the water tank:
1. Turn off the appliance and unplug it from the
power socket.
2. Turn the water tank locking clip clockwise 90
degrees and gently pull the water tank out
until it stops.
3. Turn the water pump locking clip clockwise
90 degrees, detach the water pump from its
fitting, and remove the water tank.
4. Empty the water tank and dry with a soft
cloth.
5. Slot the water tank back into position and
attach the water pump to its fitting turning
the water pump locking clip counterclock-
wise 90 degrees to fully secure.
6. Push the water tank back in fully and turn the
water tank locking clip counterclockwise 90
degrees to fully secure.
Cleaning

General Cleaning:

Turn off the appliance and unplug it from the
power socket. Use a soft, dry cloth to clean
away any dust, or debris from the exterior
surface of the appliance.

Air Filter Cleaning:

Clean the appliance's air filter once every two
weeks.
07 | English
The air filter is located within the filter casing
behind the blue honeycomb air filter.
To access the air filter:
1. Gently remove the filter casing from the rear
of the appliance.
2. Remove the honeycomb air filter from in front
of the air filter and then remove the air filter
from the filter casing.
3. Use a firm brush and/or vacuum cleaner to
clean the air filter of any dust and particles.
4. Return the air filter and honeycomb air filter
to the filter casing and then the entire filter
casing to the rear of the appliance.
Water Tank Cleaning:
The water tank should be cleaned every few
weeks to prevent the growth of mould, mildew,
and bacteria.
Remove the water tank.
1.
2. Use mild detergent in conjunction with warm
water and a soft cloth to clean the water
tank.
3. Dry the water tank using a soft cloth.
Replace the water tank.
4.
Note: Do not use boiling water to clean the
water tank.