Filling The Water Tank - ProBreeze PB-AC02 Mode D'emploi

Filling The Water Tank

For the cooling mode to function the appliance's
water tank requires filling. Ensure fresh water is
added to the water tank prior to every use.
To fill the water tank:
1. Turn off the appliance and unplug it from the
power socket.
Turn the water tank locking clip clockwise 90
2.
degrees and gently pull the water tank out
until it stops.
3. Turn the water pump locking clip clockwise
90 degrees, detach the water pump from its
fitting, and remove the water tank.
4. Fill the water tank with fresh water to the
max line. For enhanced cooling add ice
cubes and/or the two ice packs to the water
tank also.
5. Slot the water tank back into position and
attach the water pump to its fitting turning
the water pump locking clip counterclock-
wise 90 degrees to fully secure.
6. Push the water tank back in fully and turn the
water tank locking clip counterclockwise 90
degrees to fully secure.
Notes:
• If the water level is too low three beeps will
sound and the cooling mode indicator will
continue to flash until cooling mode is turned
off and/or the water tank has been refilled
with water.
• Place the ice packs in a freezer for at least
four hours prior to use.
Do not fill the water tank over the max line or
•
below the min line.
2.
3.
English | 06