Yakima WindShield Mode D'emploi page 2

Attach the CENTER brackets.
Remove the plastic from the Fairing.
•
• Position the bottom edge of the fairing
in the tabs on the bracket ends.
• The bracket holes should align with the
holes in the fairing.
• Starting with the snap rivets in the open
position, place them through the holes
in the fairing and brackets and push the
screw down.
Attach ouTER bRACkETs.
1035761A-2/8
• Rest the fairing on the vehicle with
the brackets touching the front
crossbar.
• Wrap the straps around the
crossbar and hook the barrel into
the slot on the underside of the
bracket.
• Center the fairing on the rack.
• Use the allen wrench provided to
remove slack in the straps.