Location Of Parts And Basic Remote Operations; Parts Description - Sony STM0034 Mode D'emploi

Location of Parts and Basic Remote
Operations
This chapter provides information on the
location of buttons and how to use them to
perform basic operations.
However, some functions explained in this
section may not work depending on the model of
the receiver.
For the functions of the receiver you purchased,
refer to the Operating Instructions supplied with
the receiver.
This remote is only for 2ND ZONE out and
3RD ZONE out operations. You cannot
control the main receiver directly with this
remote.

Parts description

0
9
8
7
GB
4
?/1
1
USE MODE
2ND ZONE 3RD ZONE
2
VIDEO 1 VIDEO 2 VIDEO 3
VIDEO 4 VIDEO 5 LD
3
DVD TV/SAT TAPE
MD/DAT CD/SACD TUNER
SOURCE
n N
X x
. >
m M
CH/PRESET/D.SKIP SHIFT
4
– +
MUTING
5
MASTER
VOL
+
6
–
Operating the main receiver
from the 2nd (or 3rd) zone
?/1
1
Press to turn the receiver in the 2nd (or 3rd)
zone on or off.
Command mode buttons
Press to select the command mode of the
remote (2ND ZONE or 3RD ZONE).
3RD ZONE mode is only for STR-
DA5000ES and STR-DA9000ES.
Input buttons
3
Press one of the buttons to select the
component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned to
control Sony components as follows. You
can change the button assignments
following the steps in "Changing button
assignments" on page 6.
Button Assigned Sony component
VIDEO1 VCR (VTR mode 3)
VIDEO2 VCR (VTR mode 1)
VIDEO3 VCR (VTR mode 2)
a)
VIDEO4 VCR (VTR mode 4)
a)
VIDEO5 VCR (VTR mode 5)
a)
LD LD player
DVD DVD player
TV/SAT TV tuner
TAPE Tape deck B
MD/DAT MD deck
CD/SACD CD/Super Audio CD player
b)
TUNER Built-in tuner
SOURCE The current input selected for the
main receiver
a)
STR-DA9000ES only.
b)
The setting cannot be changed.
MASTER VOL +/–
6
Press to adjust the volume level for 2ND
ZONE or 3RD ZONE output.
MUTING 5
Press to mute the sound.
2