Velleman CAMCOLD4 Notice D'emploi page 12

Group setup
x000 means no action has been selected. If you assign a preset, it will show
p001~p128; if you assign a swing motion, it will show s1~s8; if you assign a pattern, it
will show t1~t4. CLEAR GROUP will delete all 20 entries.
Setup action
Privacy mask setup
Enable or disable the display of the masking. Program the zone in the SET PRIVACY
MASK submenu.
Privacy zone setup
Move to the scene to hide using the joystick. Adjust the zoom since the mask will be
created at full screen size. When finished masking, press F- to confirm or press F+ to
cancel. The mask will now be displayed. Press F- to save or F+ to cancel. After you exit
the menu, you will notice the mask whenever you move to the zone the mask is
assigned to. The number in the centre represents the mask number. Max. 8 zones can
be assigned. Note that the zone can be a little misaligned since the OSD display is
relatively slow and the minimum resolution is limited.
CAMCOLD4_v2
Select the desired group number using the joystick
and press F- to modify.
Use the joystick to select an entity to be modified.
Press F-.
Select the proper action (x, s, t or p) using the
joystick. Press F-. If you press F+ the modified value
will be ignored.
When completed, move to OK and press F- to finish.
12 VELLEMAN