Kenwood KDC-X996 Guide De Démarrage Rapide page 13

Fuse (10A)
Wiring harness
(Accessory1)
If no connections are made, do not let the wire come out from
the tab.
Blue/White
(Power control wire)
Blue (Antenna control wire)
Brown (Mute control wire)
Orange / White
(Dimmer control wire)
Light Blue/Yellow
(Steering remote control wire)
FM/AM antenna input
AUX input (Stereo)
L
R
Use the mini-plug which is stereo type and
does not have any resistance. (3.5 mm (1/8") ø)
To SiriusXM Connect Vehicle Tuner (optional
accessory)
When using the optional power amplifier,
connect this wire to its power control
P.CONT
terminal.
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
ANT.
CONT
power terminal for the booster amplifier of
the film-type or short pole type antenna.
(Max. 300mA, 12V)
To connect the Kenwood navigation
system, consult your navigation manual.
MUTE
To car light control switch
ILLUMI
To use the steering wheel remote control
feature, an exclusive remote adapter (not
REMOTE CONT
supplied) that matches your car is required.
STEERING WHEEL
REMOTE INPUT
Rear output
R L
Front output
Subwoofer output
English | 13