Information About Wireless Operation; Duty Cycle; Scope Of Delivery; Technical Data - brennenstuhl BRENN_1294510 Mode D'emploi

Information about Wireless Operation

This device uses the 868.3 MHz proprietary wireless protocol. Wireless
transmission is implemented using a non-exclusive channel, interference
can therefore not be excluded.
The range in building may vary greatly from open areas. In addition to
the transmission power and the reception characteristics of the receivers,
ambient conditions, e.g. humidity in addition to the structural conditions
on site, are important factors.
The range can partly be significantly reduce due to:
• wood, gypsum, concrete, reinforced concrete walls
• proximity to metal and conductive objects
• broadband interference, e.g. in residential areas (DECT phones,
mobiles, wireless headphones, wireless speakers, wireless
weather stations, baby monitors)
• proximity to electric motors, transformers, mains adapters,
computers

Duty Cycle

Duty cycle refers to a transmission time limit regulated by law for
devices transmitting in the 868 MHz range. It is intended to ensure
smooth operation of devices operating in the 868 MHz range. The
maximum transmission time of each device is 1 % of an hour
(corresponding to 36 seconds / hour). Once the 1 % limit has been
reached it cannot transmit until the time limit of the duty cycle has
ended, so after one hour.

Scope of delivery

1 x Wireless Switch Adapter with Energy Measurement
1 x Quick start guide
1 x Instructions for use (digital, available for download)

Technical data

Product designation: FA EM 868 01 W3600 3726
Item no.: 1294510
Radio frequency: 868.3 MHz
Max. transmitting power: < 20 mW
Frequency: 868.1 - 868.5 MHz
Duty cycle: < 1 % per h
Supply voltage: 230 V/AC, 50 Hz
Max. switching capacity: 3600 W
Power input: < 1 W
Ambient temperature: 0 °C to 35 °C
Protection type: IP20
Open area range: approx. 100 m
Wireless Switch Adapter with Energy Measurement 868.3 MHz
Dimensions (W x H x D): 113.2 x 55 x 70.7 mm
Weight:
Device corresponds to: protection class I, pollution degree: 2, rated
impulse voltage: 2500 V, operating mode: S1, PTI175, level: 3,
unipolar switch-off
Non-replaceable installation fuse: thermal cutoff
Subject to technical changes without notice.

Device overview

LED Status
Lights up green when
Flashing red
Rapid flashing red

Function

The wireless switch adapter is part of the Brennenstuhl Home Automation
Systems, controlled via app or the BrematicPRO PC software. The
wireless switch adapter can be connected and controlled directly with
the BrematicPRO wireless remote control. It can be directly linked with
the Brennenstuhl Home Automation Systems BrematicPRO via the
BrematicPRO Gateway to use other software-based functions (e.g.
timer control, theme control, astro function). In addition to switching
connected consumers on and off, the device features a measuring
function: Measurements such as voltage, power input and energy
consumption are transmitted to the gateway and displayed in the
BrematicPRO app / PC software.
The device stores the energy consumption of the connected device in
Wh. The consumption can be deleted using "Reset" in the app.
114 g
Safety socket
Pair button with LED power indicator
and ON/OFF button
On
Pairing mode
Wireless switch adapter reset
EN 11