Wireless Switch Adapter With Energy Measurement 868.3 Mhz; List Of Pictograms Used; Safety Notes; Intended Use - brennenstuhl BRENN_1294510 Mode D'emploi

Wireless Switch Adapter with Energy Measurement 868.3 MHz

List of pictograms used

Please read the instructions for use!
Observe the warnings and safety notes!
Caution! Risk of electric shock!

Safety notes

The instructions for use are a part of this product.
They contain important information about safety,
use and disposal. Before using this device, please
familiarise yourself with all instructions for use and safety notes.
Only use the device as described and for the indicated purpose.
Be sure to include all documentation when passing this device
on to others.
WARNING!
RISK OF FATAL INJURY AND
ACCIDENT HAZARD FOR TODDLERS AND SMALL
CHILDREN! Never leave children unsupervised with the
packaging materials. They pose suffocation hazard as children
may swallow or inhale small parts or films. Children frequently
underestimate the dangers. Always keep children away from
the device. It is not a toy.
This product may be used by children aged 8 years and up, as
well as by persons with physical, sensory or mental impairments
or lacking experience and/or knowledge, so long as they are
supervised or instructed in the safe use of the product and
understand the associated risks. Do not allow children to play
with the device. Cleaning and user maintenance must not be
performed by children without supervision.
Only operate this device in a dry, dust-free environment.
Only operate this device indoors.
Do not expose the device to adverse conditions, such as
• moisture,
• continuous sunlight,
• heat radiation,
• cold,
• vibration.
CAUTION! RISK OF INJURY!
We assume no liability for property damage or personal injury
due to improper use or failure to observe the safety notes! This
will void the warranty/guarantee!
10 EN
Caution! Fire hazard!
Dispose of the packaging and device in an
environmentally-friendly manner!
Any use not specified in these instructions for use will damage
the product. Do not modify the device. Otherwise safe operation
is not guaranteed.
RISK OF ELECTRIC SHOCK!
Do not open the housing. This device has no parts which require
maintenance. In the event of a malfunction, please contact Service.
Work on the mains must be performed by an electrician whilst
de-energised.
This device is not suitable for disconnecting. The load is not
electrically isolated from the mains.
Do not use the device if it is visibly damaged.
Do not connect multiple wireless switch adapters in series.
In the event of a malfunction, disconnect the device from the
socket immediately.
FIRE HAZARD!
Do not connect any terminal devices to the device which could
cause a fire or other damage when switched on unattended
(e.g. iron).
Do not switch the device uncontrolled or whilst unattended.
Do not use extension leads.
Ensure the socket is located near the connected device, easy to
access and the device will not be covered during operation.
Do not overload the device.
Overloads may result in fire hazards or product damage. The
maximum load is 3600 W.

Intended use

The wireless switch adapter is solely intended to switch consumers
connected to the wireless switch adapter on and off in dry indoor
locations and to determine measurement data such as voltage, power
input and energy consumption.