Items Supplied; Technical Data - Hilti TE 500-A36 Notice D'utilisation

Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED flashes, the product is not in
working order.
4 LEDs flash, the product is not in
working order.
Battery state of charge cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.

3.5 Items supplied

Breaker, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group.
4

Technical data

Rated voltage
Weight
Chuck
Storage temperature
Ambient temperature for operation
5 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
*2240496*
Printed: 16.07.2019 | Doc-Nr: PUB / 5503698 / 000 / 00
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
2240496
TE 500-A36
36 V
7.9 kg
(17.4 lb)
TE­Y
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
36 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
English 9