Items Supplied; Technical Data - Hilti TE 1000-AVR Mode D'emploi

Masquer les pouces Voir aussi pour TE 1000-AVR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.7 Items supplied

Breaker, side handle, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com.

4 Technical data

4.1 Technical data
Note
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight
Single impact energy
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting and adjusting the side handle
CAUTION
Risk of injury! Loss of control over the breaker.
▶ Check that the side handle is fitted correctly and tightened securely.
▶ Fit or adjust the side handle.
Note
The instructions provided with the side handle must also be observed.
5.1.2 Detachable supply cord
CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶ Connect the detachable electric connector to the electric tool only when it is clean and dry and
when the supply cord is unplugged from the power outlet.
▶ Connect / disconnect the detachable supply cord.
Printed: 24.01.2017 | Doc-Nr: PUB / 5165611 / 000 / 04
TE 1000­AVR
27.6 lb
(12.5 kg)
26 J
2
English
5

Publicité

Table des Matières
loading

Table des Matières