Futurelight PHS-1200E Mode D'emploi page 58

Lamp off time (in minutes)
With this function, you can display the temporary running time of the lamp from the last lamp on. The display
shows "XXXX", "X" stands for the number of minutes. The counter is reset after turning the lamp off.
Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select "Clear lamp time" by turning the encoder.
• Press the Enter button, the display shows "ON" or "OFF".
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.
Fan operating days since last cleaning
With this function you can display the operating days since the fan/anti-dust filter was cleaned last.
The display shows "XXXX", "X" stands for the number of days.
Clear fan operating days
With this function you can clear the operating days of the fan. Please effect this function after every cleaning
procedure of the fan/anti-dust filter.
• Select "Clear fans clear t." by turning the encoder.
• Turn the encoder, the display indicates "ON" or "OFF".
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.
Select fan maintenance interval
With this function you can select the desired maintenance interval of the fan/anti-dust filter.
You can select either OFF or 1-250 days. We recommend a cleaning procedure every 90 days.
• Select" Fans clear t. setup " by turning the encoder.
• Press the Enter button, the display indicates "OFF".
• Turn the encoder, to adjust the desired number of days or "OFF".
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.
Temp. Info.
Base Temp
With this function you can display the temperature in the projector base (near LCD-display) in Celsius.
Near lamp Temp
With this function you can display the temperature in the projector-head (near CMY-filter) in Celsius.
Product Info.
Within this menu, you can find the data concerning the type, Internet and phone number.
Software version
With this function you can display the software version of the device.
• Select "Software version" by turning the encoder.
• Press the enter-button, the display shows "V-X.X", "X.X" stands for the version number, e.g. "V-1.0", "V-
2.6".
• Press the Mode/Esc-button in order to return to the main menu.
58/130 00026924.DOC; Version 1.6