Technical Specifications - Hudora 76657 Instructions De Montage Et Mode D'emploi

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packa-
ging carefully in case questions arise in the future. Please always include
these instructions when handing on the product to a third party. This pro-
duct must be assembled by an adult. This product is designed for private/
domestic use only. This product is not designed for commercial/industrial
use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been
designed for.

TECHNICAL SPECIFICATIONS

Item: Climbing holds
Item number: 76657
Minimum user age: 3 years
Max. height for suspension: 2,50 m
Maximum user weight: 50 kg
If you have assembly problems or would like further information on the
product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x 12 climbing holds (without mounting material)
These instructions
Other items are meant to facilitate safe transportation and are not required
for the installation and use of the product.
SAFETY INSTRUCTIONS
The mounting of the climbing holds requires a lot of time as well as atten-
tion and care. We recommend that you use a torque wrench for the moun-
ting. Tightening the screws should be done with a torque of max. 20 Nm.
In the first days and weeks after the mounting of the climbing holds, it may
become necessary that the fastening screws of climbing holds have to be
retightened. In general, the mounting of the climbing holds as well as the
climbing grips themselves should be checked regularly for tightness and
damage, regardless of whether they are used or not. - The liability of the
manufacturer and the seller is moreover excluded for any other or else
improper use of the product. No liability will be accepted for body, conse-
quential, or incidental damages arising from the use of this product. No
liability will in particular also be accepted for any damage to the selected
mounting points.
• WARNING! Only for domestic use. Suitable for outdoor and indoor use!
• WARNING! For use only under adult supervision.
• WARNING! Not suitable for children under 36 months. Risk of falling.
• WARNING! Not suitable for children under 36 months. Small parts. Cho-
king hazard.
• The climbing holds should never be coated with paint or coloured. The
climbing holds can be damaged as a result.
• The climbing area should be adequately and evenly illuminated. The
glare of climbing persons has to be prevented by appropriate measures.
• When assembling the product, make sure that the play equipment or
other construction selected as a support can withstand the stress (at
least 200 kg). The wall and surface of the play equipment must be
handled in such a way that the children cannot injure themselves on it.
• The wearing of jewellery, especially of finger rings should be foregone.
Risk of injury!
• Keep fall space clear within 2 m of the climbing area! No people or ob-
jects should be present in the fall area! The impact area shall be at
ground level and free of obstacles.
• Fall areas have to be free of railings, stairs, glasses, and other objects.
• Attention! Holds can break in the case of improper installation!
• Mount the holds at jump height. In the case that a step height of 60 cm
has to be climbed over, the surface should be covered with absorbing
foam mats, bark mulch or sand.
• As of a step height of 200 cm, climbing has to be done with a fall safety.
• Maximum raised height must not exceed 250 cm as measured from the
ground.
• Improper use or misuse of the product is dangerous and can lead to
serious injury.
• Never climb barefooted. Risk of injury!
All images are examples of the design.
• Access should be prevented for unauthorised individuals.
• Do not climb with damp/wet hands. Risk of slipping off!
• That product has to always be clean and dry when used.
• For the learning of special climbing techniques, please contact a trained
professional coach.
• Never overstrain children. Risk of injury!
• Loose holds should be immediately tightened or removed.
• The product should not be used in bad weather conditions such as storms,
thunderstorms, rain, etc., and not in poor visibility conditions (twilight,
darkness, etc.).
• The climbing has to be immediately aborted, if the child feels uncomfor-
table or is dizzy.
• The parts of the climbing wall should be replaced depending on frequency
of use and type of use after about 4 years. In the case of any doubt with
regard to safety the set should be replaced immediately.
• A climbing hold can not be repaired.
MOUNTING
If in doubt, please always seek the assistance of a skilled worker who can
help you with the mounting and the selection of the appropriate screws.
No liability will be accepted for damages arising from the misapplication
of the instruction manual. The mounting of the climbing holds is depen-
dent on the underground. Please only use steel screws and appropriate
washers for the mounting of the climbing holds. There are three different
types of mounting.
Mounting in concrete:
Recommended for the mounting of the climbing holds in concrete or full
clinker brick, are M10 brass expansion dowels and M10x50 hex bolts. Pro-
ceed as follows: 1. Drill the hole. | 2. Clean the hole. | 3. Insert the expan-
sion dowel into the drilled hole. | 4. Mount the drop-in anchor with setting
tool and hammer. | 5 mount the climbing holds with bolts (20 Nm).
Mounting in hollow block-/perforated brick:
Recommended for the mounting of the climbing holds in solid building
materials with low compressive strength (hollow block- or perforated
brick), are expansion dowels (diameter = 10 mm) and M10x60 hex bolts.
Proceed as follows: 1. Drill the hole. | 2. Insert the dowels into the drilled
hole, so that the dowel is flushed with the wall surface. | 3. Mount the
climbing holds with bolts (20 Nm).
Mounting in a wooden wall:
The wooden wall / wood panels should be at least 18 mm thick. Recom-
mended for the mounting of the climbing holds in wooden walls, are M10
T-nuts and M10x50 hex bolts. Proceed as follows: 1. Drill the hole. | 2.
Insert the T-nut from the backside into the drilled hole and hit hard with the
hammer until the T-nut rests with the rim on the wooden wall. | 3. Mount
the climbing holds with bolts (20 Nm).
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear and tear
before and after each use. Do not make any structural changes. For your
own safety, please use original spare parts only. These can be sourced
from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt,
please contact our service team (http://www.hudora.de/). Store the pro-
duct in a safe place where it is protected from the elements, cannot be
damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate coll-
ection point provided in your area. Local waste management companies
will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise how-
ever, we put just as much effort into rectifying them. You can find nu-
merous information on the product, replacement parts, solutions to pro-
blems and lost assembly manuals at http://www.hudora.de/.
3/8