Change Of Hinge Side - Vestfrost M85 Mode D'emploi

GB
Change of hinge side - M85.
The door can be changed from right-hinged to left-hinged and vice versa as follows:
1. Rubber plug
6. Door 7. Screw 8. Bottom hinge 9. Cabinet foot
● Ensure that the cabinet is not connected
to the mains
● Remove the rubber plugs (1). See fig. 5.1
● Remove the screws (2) and take off the
hinge cover (3)
● Remove the 3 screws (4) which hold the
top hinge and lift off the top hinge (5)
SUPPORT THE DOOR! See fig. 5.2
● Lift off the door (6) and place the cabinet
on the back
● Remove the 3 screws (7) which hold the
bottom hinge (8) . See fig. 5.3
● Dismount the cabinet foot (9) from the ca-
binet and remount it on the opposite side
Abb. 5.1
Abb. 5.3
2. Screw 3. Hinge cover 4. Screw
Abb. 5.2
Abb. 5.4
● Move the bottom hinge enclosed to the
left side and mount the low cabinet foot in
this one
● Mount the bottom hinge in the left side
using the 3 screws (7)
● Mount the door on the bottom hinge
● Mount the top hinge, hinge cover, and
rubber plugs. See fig. 5.4.
● Mount the door handle on the opposite
side
● Lift up the cabinet again and wait 1 hour
before connecting to the mains to avoid
oil in the cooling system
6
5. Top hinge