Horizon Fitness EX-68 Manuel Du Propriétaire page 17

ASSEMBLY Step 8
ce5.1, eX-58 SHoWn
CONSOLE
CONSOLE MAST
NOTCH
TAB
CONSOLE CABLES
UPPER HANDLEBAR
BOLTS (T)
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
NOTE: Be careful not
to pinch any wires while
attaching the console.
HarDWare BaG 8 CONTENTS :
Open hardware bag 8.
A
Attach the conSole caBleS to the
B
conSole.
Carefully tuck the conSole caBleS into
C
the conSole MaSt before attaching the
conSole. Attach conSole to conSole
MaSt using 4 BoltS (t).
Slide Upper HanDleBarS onto loWer
D
HanDleBarS and align notcH with taB
making sure handlebars are joined together
completely. Secure Upper HanDleBarS
to loWer HanDleBarS using pre-
attacHeD Set ScreWS.
Repeat step D on other side.
E
YOU ARE FINISHED!
BOLT (T)
10 mm
Qty: 4
all
MoDelS
17