Setting The Aux Title; Introduction Of Xm Operation; Xm Operation; Switching The Xm Display - Pioneer DEH-P3900MP Mode D'emploi

Section
10 Other Functions

Setting the AUX title

The title displayed for each AUX1 or AUX2
source can be changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press a or b to select a letter of the al-
phabet.
Each press of a will display alphabet, num-
bers or symbols in ascending order (A B C ...).
Each press of b will display a letter in des-
cending order.
3 Press d to move the cursor to the next
character position.
When the letter you want is displayed, press d
to move the cursor to the next position and
then select the next letter. Press c to move
backwards in the display.
4 Move the cursor to the last position by
pressing d after entering the title.
When you press d one more time, the entered
title is stored in memory.
5 Press BAND to return to the playback
display.
36
En

Introduction of XM operation

1
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.
1 XM tuner information
Shows the XM tuner information which has
been selected.

XM operation

XM operation of the following function with
this unit differs.
! Switching the XM display (Refer to this
page.)
! Switching the XM channel select mode
(Refer to the next page.)
This unit does not have the following function.
! Scrolling the text in the display

Switching the XM display

% Press DISPLAY to switch the XM display.
Each press of DISPLAY changes the XM dis-
play in the following order:
Channel name—Band/preset channel number
—Artist name—Song title—Channel category