Television; Dvd Player And Muti-Dvd Player; Turning The Clock Display On Or Off; Using The Aux Source - Pioneer SUPER TUNERIII D DEH-P6500 Mode D'emploi

Section
Other Functions
09

Television

Button Operation
PAUSE Press to turn loudness on or off.
Press and hold to turn best stations se-
AUDIO quential memory on. Press to turn best
stations sequential memory off.
Press to quickly lower the volume level,
DISPLAY by about 90%. Press once more to re-
turn to the original volume level.
FUNCTION No function.

DVD player and Muti-DVD player

Button Operation
PAUSE Press to turn pause on or off.
AUDIO Press to select the repeat range.
Press to quickly lower the volume level,
DISPLAY by about 90%. Press once more to re-
turn to the original volume level.
FUNCTION No function.
Turning the clock display
on or off
You can turn the clock display on or off.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 6 seconds.
Note
Even when the sources and the feature demo are
off, the clock display appears on the display.
Pressing CLOCK turns the clock display on or
off.
36
En
HHHHHHHHHHHHHH

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 32.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE appears in the display.
2 Press 1 numbered button to select the
desired character type.
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)
# You can select to input numbers and symbols
by pressing 2 numbered button.
3 Press a or b to select a letter of the al-
phabet.
Each press of a will display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... @ # < order. Each press of b
will display a letter in the reverse order, such
as Z Y X ... C B A order.