Multi-Cd Player; Playing A Cd; Introduction Of Advanced Multi-Cd Player Operation - Pioneer DEH-P3900MP Mode D'emploi

Récepteur cd
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Multi-CD Player

Playing a CD

1
4 4
You can use this unit to control a multi-CD
player, which is sold separately.
! Only those functions described in this man-
ual are supported by 50-disc multi-CD
players.
1 Track number indicator
Shows the track number currently playing.
2 Disc number indicator
Shows the disc number currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
4 RPT indicator
Shows when repeat range is selected to cur-
rent track.
1
Press SOURCE to select the multi-CD
player.
Press SOURCE until you see MULTI CD dis-
played.
2
Select a disc you want to listen to with
the 1 to 6 buttons.
For discs 1 to 6, press the corresponding but-
ton number.
For discs 7 to 12, press and hold the corre-
sponding numbers, such as 1 for disc 7, until
the disc number appears in the display.
# You can also sequentially select a disc by
pressing a/b.
2
3
3
To perform fast forward or reverse,
press and hold c or d.
4
To skip back or forward to another
track, press c or d.
Notes
! When the multi-CD player performs the pre-
paratory operations, READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner's
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
! When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, text information
currently selected on Using CD TEXT functions
on page 25 automatically begins to scroll in
the display.
Introduction of advanced
multi-CD player operation
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)—RDM (random play)—
SCAN (scan play)—ITS-P (ITS play)—PAUSE
(pause)—COMP (compression and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Section
07
21
En

Publicité

Table des Matières
loading

Table des Matières