BoomToneDJ Twinny Beam Mode D'emploi page 15

CH19
CH20
CH21
CH22
CH23
CH24
Attention: How to set master-slave without connecting to DMX
1. The Sound Master-slave : Link all fixtures. Don't connect the DMX Controller, set the
address to A001, choose one fixture as Master, and set the one to Sound mode (so 1,so 2).
Then sound master-slave mode is achieved.
2,The Auto program Master-slave : Link all fixtures. Don't connect the DMX Controller,set
address to A001, choose one as Master, and set to Auto model(de 1,de 2...de 9). Then auto
master-slave mode is achieved.
-Set DMX address
Display the DMX 512 value of each channel. With this function you can display the DMX
512 value of each channel. The display automatically shows the channel with a value
changing.
Red 2 0-255: 0-100%
Green 2 0-255: 0-100%
Blue 2 0-255: 0-100%
White 2 0-255: 0-100%
0-127: No function
Auto 128-255: Program to run automatically after 3
seconds
0-128: No function
Reset
129-255: RESET
15