Safety Information - Knick A 26000 Mode D'emploi

1.

Safety Information

The warning symbol on the device (exclamation point in triangle)
means: Read this user manual, observe the Specifications, and follow
the safety instructions.
WARNING! Protection against electric shock
For applications with high working voltages, take measures to prevent
accidental contact and make sure that there is sufficient distance or
insulation between adjacent devices.
CAUTION!
Be sure to take protective measures against electrostatic discharge
(ESD) when handling the devices!
CAUTION!
The VariTrans® P 26000 universal isolated signal conditioners shall only be
installed by qualified and specially trained personnel authorized by the
operating company. Do not connect the device to power supply before it is
professionally installed. Do not change the measuring range during operation.
Observe the national codes and regulations during installation and selection of
cables and lines.
Equipment shall be provided with a means for disconnecting it from each
operating energy supply source. The disconnecting means shall disconnect all
current-carrying conductors. (It must be easily accessible and clearly identifiable
by the operator.)
Mains supply must be protected by a fuse of 20 A max.
14