Description Of The Device; Features - Futurelight PHS-220 Mode D'emploi

The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Medium-Moving-Head
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• 8 brilliant, dichroic colours plus white
• Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)
• Rainbow-effect with adjustable speed in both directions
• Gobo-wheel with 6 rotating gobos plus open
• All gobos can be interchanged
• With gobo-shake function
• Exact positioning via 16 bit Pan/Tilt movement resolution
• Strobe-effect with 1-10 flashes per second
• Motorized focus
• Mechanic dimmer
• Software-update possible via optional accessory
• PAN-angle switchable between 630° and 540°
• Lightbeam with 19° radiation angle
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset, lamp on/off
• For MSD/HSD 250 or MSD 250/2 lamp
• DMX-control via every standard DMX-controller
34/111 00025097.DOC,Version 1.7