Connecting Wires To Terminals - Kenwood KMR-330 Mode D'emploi

Connecting Wires to Terminals

To remote control (Light Blue/Yellow)
REMO.CONT
Fuse (10A)
Wiring harness
(Accessory1)
Power control/Motor antenna control wire
(Blue/White)
TEL mute wire (Brown)
Motor antenna control wire (Blue)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
16
|
KMR-330
Front preout
FRONT
L
Rear preout/Subwoofer preout
FM/AM antenna input
R
To Kenwood disc changer/
External optional accessory
If no connections are made, do not let the wire come out from the tab.
P.CONT
MUTE
ANT.
CONT
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Connect either to the power control terminal when using the
optional power amplifier, or to the antenna control terminal
in the vehicle.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
Depending on what antenna you are using, connect either to
the control terminal of the motor antenna, or to the power
terminal for the booster amplifier of the film-type antenna.
Ignition key switch
Fuse box
ACC
Fuse box
(Main fuse)
+
–
Battery