Operation; Inserting/Replacing The Batteries; Fitting/Replacing The Pumice Attachment - SilverCrest SHE 3 B2 Mode D'emploi

Operation

Inserting/replacing the batteries

1) Open the battery compartment
down on the grooved part of the battery com-
partment cover and pushing the battery compart-
ment cover downwards.
2) Remove the old batteries if inserted.
3) Insert new batteries as shown in the polarity
diagram in the battery compartment
Always use 1.5 V AA/LR6 batteries.
4) Push the battery compartment cover back onto
the battery compartment

Fitting/replacing the pumice attachment

NOTE
► To order new pumice attachments
tact our Service team (see section "Service").
Please ensure that you have the IAN number to
hand (see cover of the operating instructions).
To remove a pumice attachment
1) Press the release
same time, pull the side of the pumice attach-
ment
2) You can then pull the pumice attachment
off the drive shaft
│ GB │ IE
■ 10
/ next to the release
until it clicks into place.
/ :
downwards and, at the
.
by pressing
.
/ , con-
upwards.
/
SHE 3 B2