Network Configuration; Network Requirements; Connecting To A Power Supply; Switching The Speaker On/Off - Medion LIFE P61071 Mode D'emploi

7. Network confi guration
The Wi-Fi speaker is connected to the network via Wi-Fi. The Wi-Fi antenna of the
speaker receives the signals from the network router.

7.1. Network requirements

The network requires the following properties in order for the device to access mu-
sic files via the network:
• The router used for the network must have a DHCP server function so it can au-
tomatically assign the device a network IP address.
Otherwise, set the DHCP function via the Web interface.

8. Connecting to a power supply

 Connect the power supply plug of the supplied adapter (model: GFP451-
1625BX-1) to the DC socket on the device.

9. Switching the speaker on/off

Switching on the speaker
 To switch on the power, switch on the device using the POWER switch at the
back. The operating LED lights up red and the speaker is in standby mode.
 Press the
button briefly to switch the speaker on. The operating LED lights up
white when the speaker is already connected to a wireless network. If the speak-
er is not connected to a wireless network, the operating LED flashes white.
Standby mode
 Press the
button briefly to switch the speaker into standby mode. The operat-
ing LED will light up red. In standby mode, the speaker retains the network con-
nection so that it is available immediately after being switched back on.
Switching off the loudspeaker
 To switch the speaker off, switch off the device using the POWER switch at the
back. The operating LED will go out.
DE
EN
FR
NL
29