Button
Bouton
Botón
Wand Swivel
Pivot du tube
Dispositivo giratorio
del mango
Up and In
Vers le haut et à l'intérieur
H
acia arriba y hacia dentro
ASSEMBLY
Wands
Cord Holder
Attache du cordon
Sujetador del cordón
Power Nozzle
Raised Area
Portion en relief
Área elevada
➢ ➢ Slide wands together until wand
button snaps into place.
➢ ➢
Turn wand button to slotted area of
wand swivel
➢ ➢ Insert wands into POWER NOZZLE
until the wand button snaps into
the grooved slot.
➢ ➢ Connect POWER NOZZLE plug and
cord as shown.
➢ ➢ Do not force.
➢ ➢ Raised area of plug must face toward
hand.
➢ ➢ If hard to install, turn the plug over
and try again.
To Remove:
➢ Press wand release button
➢ Pull wands out of POWER NOZZLE.
- 14 -