Installing The Software - Pentatech DVT30 Mode D'emploi

Default: Screen always on.
[104] - Display image in idle mode (MULTI CHANNELS IDLE DISPLAY)
After a period of two minutes without any buttons being pressed by the user, the displayed image changes to the idle image which can be selected
between: DISPLAY QUAD DURING IDLE TIME / DISPLAY DOORPHONE (outdoor station) DURING IDLE TIME / AT 10 SEC INTERVALS (the camera in the
outdoor station and any other activated camera will be displayed in sequence / AT 10 SEC INTERVALS W/O DOORPHONE (any additional camera will
be displayed in sequence, if only one additional camera is activated this will be displayed continuously)
Note: If only the camera 1 in the outdoor station is activated then this image will be displayed continuously.
Default: DISPLAY DOORPHONE DURING IDLE TIME
[105] - Select default to reset settings to default and to select the menu language (RESET DEFAULT)
When the language is changed (english, german, french selectable) the settings are also reset to default, and the system version is displayed. Confirm
with button [105].
Note:
By resetting to default the date will also be changed. After a reset be sure to set the date and time, and all other desired settings.
[84] - ALARM BUZZER
Select ON or OFF for an alarm sound when a motion detection recording is triggered.
Note:
If it is set to On, the buzzer remains on also when the volume is muted.
Default setting: OFF
Ring tone volume of the indoor station
!
Press the button to adjust the ring tone volume of the indoor station, which is represented in bars.
Default setting: 6 bars
Communication volume of the indoor station
!
Press the button to adjust the communication volume of the indoor station, which is represented in bars.
Default setting: 4 bars
[83] - Digital zoom (PAN TILT ZOOM)
Displays a 2x digital enlargement of the picture for a period of approx 2 minutes. Tap the direction buttons navigate within the image. To exit the zoom
function within two minutes press the top right corner of the screen.
[88] - Start sequence display
If this function is selected, each activated camera will be displayed as full image in sequence of 5 seconds. If only one camera is activated it will be displayed
constantly.
[89] - MEMORY CARD OVERWRITE
Select "ON" to enable this function. If the memory card is full the oldest files will be overwritten. If overwrite is not activated no more data will be recorded
when the memory card is full. In this case, either activate the memory overwrite function in the menu, format the card (all data will be deleted) or insert a new
card and format it as described in "Format Storage".
Default setting: OFF
14. Viewing recordings on a PC
Alternative to viewing recorded data on the monitor the microSDHC card can be
removed and the the data viewed on a PC, after the included software has been
installed.

14.1 Installing the software

!
Insert the included CD [34] into a running PC.
!
Select the exe file on the CD with a double click, this opens a window on the
PC screen.
!
Click on "Next >".
!
Tick the box by "I have read and accept the license terms".
!
Click on "Install >" and wait until the next window opens.
!
Click on "Finish". The installation will be ended and the icon Sec24Media
Player will pop up on the desktop.
GB - 51