Operation; Control/Display Panel; Overview Of Leds; Control Buttons - Bosch WBE 4100 Notice Originale

en 32 | WBE 4100 | Operation
7.

Operation

i
After the WBE 4100 is switched on, the software versi-
on appears in the control/display panel for several
seconds. After this, both displays show the value
r E L
7.1

Control/display panel

7.1.1

Overview of LEDs

7
6 5
Fig. 5: LEDs on control/display panel
Item Description
1 Displays the active (selected) balancing program and
balancing positions (see section 7.2)
2 Displays the balancing point,
lights up green when the balancing position is reached
3 Displays the Split program and Match program, lights up
when programs are active (see sections 8.4.2 and 9)
4 Displays the unit of measurement for the rim width and
rim diameter,
lit = mm,
not lit = inch
5 Displays the balancing program,
lights up when Pax program is selected
6 Displays the Match program, lights up when Match
program is active
7 Displays the direction of rotation to reach the balancing
position,
top = turn clockwise,
bottom = turn anti-clockwise
|
1 695 656 133 2011-02-18
.
0
1.05
1
2
3
4
7.1.2

Control buttons

1c
5 4
Fig. 6: Buttons on the control/display panel
Item Button Description
1a <-> Changes the rim diameter
1b 'or Changes the rim width values.
1c <+> Changes the rim distance,
2 <SPLIT> Opens and closes the program for splitting
the balancing weights.
3 <mm/ Selects the unit of measurement for the
inch> manual input of rim diameter and rim
width.
No function in the case of rim distance.
4 <MODE> Selects the balancing program
5 <MENU> Performs basic settings.
6 <START> Starts measurement.
7 <STOPP> Stops measurement, locks the WBE 4100 in
case of emergency.
Tab. 1: Function of control buttons
7.2

Balancing programs

Symbol Button
Standard program for clip-on weights
Alu1: Standard program for adhesive weights
Alu2: Concealed adhesive weights
Alu3: Inside clip-on weights /
outside concealed adhesive weights
Alu4: Inside clip-on weights /
outside adhesive weights
Alu5: Inside adhesive weights /
outside clip-on weights
Static balancing on level 1
Static balancing on level 2
Static balancing on level 3
Pax1: (Pax rim) for adhesive weights
Pax2: (Pax rim) for concealed adhesive weights
7
1b 6
Robert Bosch GmbH
1a
2
3