Starting Up And Shutting Down; Starting Up; Shutting Down - Sony UPA-PC100 Mode D'emploi

Starting Up and Shutting Down

Starting Up and Shutting Down

Starting Up

1
Make sure that the peripheral devices are switched
on, and then switch on the main switch at the user
interface panel on the back of the unit.
SCSI USB
I
LAN
O
PARALLEL RS-232C
2
Press the power switch on the back of the display.
The power lamp on the operation panel lights, and
the unit starts.
3
When the next screen is displayed, touch once the
desired part of the screen.
10
AC IN
The next screen is displayed.
This completes starting up. For details about
operations, refer to the separate User's Guide.

Shutting Down

Note
You must know the password to shut down the system.
For more details about passwords, see the User's
Guide.
1
On the next screen, touch twice lightly at the
specified location.
Touch twice here