Christopeit Sport AL 6 Notice De Montage Et D'utilisation page 19

Step 6:
Installation of the computer (12) at handlebar support (38).
1. Put the plug of connection cable (40) into the socket from monitor (12)
backside and insert the plugs of pulse connection cables (34) to the
jack of the monitor (12). Attach the monitor (12) to top monitor bracket
of front post (38) with screws (47) and washer (46).
(Attention: Ensure that the cable loom are not crunched or pinched
during installation.)
Step 7:
Attach the power with adaptor (83).
1. Please insert the plug of adaptor (83) to the power plug (70) at end of
chain guard (72L)
2. Please insert the plug of adaptor (83) to the jack of wall power
(230V~50Hz).
Step 8:
Checks
1. Check the orderly installation and function of all bolted and plug con-
nections. Installation is then complete.
2. When everything is in order, familiarise yourself with the machine at
a light resistance setting and make the individual adjustments of the
footrests (28) and (34).
Note: Please keep the tool set, the puller and the instructions carefully
because these may be required later for repairs or spare parts orders.
If you ever remove the covers (10) and (11), observe that these are attached
not only outwardly with the screws (64+65), but also inwardly at the rear end
of the cover with the screws (65).
19