Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
7.B.c
Every 6 months a maintenance should be performed to ensure proper function of the machine, perform the following procedure
to do it:
7.A SAFETY INSTRUCTIONS (page 42)
7.C REMOVING THE DISTRIBUTOR HEAD (page 43)
7.D LUBRICATING THE DISTRIBUTOR HEAD (page 44)
7.F RESETTING THE MAINTENANCE ALARM (page 45)
7.G REMOVING THE SIDE PANEL (page 45)
7.H LUBRICATING THE HORIZONTAL COLUMNS (page 46)
7.I TESTING THE SAFETIES OF THE MACHINE (page 47)
7.C
REMOVING THE DISTRIBUTOR HEAD
Periodically, remove the distributor head to clean and lubricate it. First, remove the strip of wedges. To do so, follow this
procedure :
Allen key N.2 & N.5
Rotate the loading
button in the LOAD
position.
The wedge pusher
will move back to
allow you removing
the cartridge.
With
the
2.5mm
Allen Key, unscrew
the
locking
screw
half a turn.
Every 6 months:
Figure 7-3
Figure 7-5
Remove
the
cartridge.
Pull
out
the
distributor head of
the machine.
MACH 5 CART
Figure 7-4
Figure 7-6
43
Publicité
Table des Matières
