Cassese MACH 5 Mode D'emploi page 14

USER MANUAL
If the indicated pressure is not 6 bars (85 p.s.i.), check the pressure at the air source (compressor). Then, if pressure is correct at
the air source, it means the regulator of the machine needs fine tuning. Perform the following procedure to adjust it (Figure 2-9
and Figure 2-10)
Allen key N.3
Unscrew both
screws of the
drawer panel with a
3mm Allen key.
Then open the
drawer to have
access to the air
pressure regulator
knob.
Pull up
pressure
knob and turn it
(clockwise = more
pressure) until the
needle of the air
pressure
reaches
(85p.s.i.).
Figure 2-9
the air
regulator
gauge
6 bars
MACH 5 CART
Figure 2-10
14