Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
Z1791:
Green round clamp
Z556:
Z1791:
Grooved connector
Green round clamp
1.D
TECHNICAL SPECIFICATIONS OF MACH 5 CART
Minimum moulding width:
Maximum moulding width :
3 wedge types :
Machine gross weight :
Dimensions :
Width 690mm (27.16") x Depth 612mm (24.09") x Height 1171mm (3ft 107/64'').
Power supply:
110/230V, 50/60 Hz, single-phase, Consumption : 500W.
Air Supply :
compressed air 6-7 bars
Average consumption per cycle :
Z18065:
Round clamp holder
Z701:
Male US connector F1/4
5mm (3/16") / Minimum moulding height : 7 mm (1/4")
150 mm ( 5 29/32") / Maximum moulding height : 100 mm ( 4 13/32" )
Maximum stroke between first and last wedge (at 45°) : 190 mm (7 31/64")
Softwood, Hardwood & MDF. Use only Cassese® Genuine Cartridge Wedges.
Cassese® Genuine Cartridge Wedges sizes: 5, 7, 10, 12 and 15 mm.
112 kg .
2 Nl at 6 bars (we consider one cycle is a corner with 2 positions and 1 wedge per position)
Z1783:
Yellow round clamp
Z1783:
Yellow round clamp
Z749:
Quick coupling
MACH 5 CART
Z21524:
1 x Chevron rubber
Z21524:
1 x Chevron rubber
Z25780 (x4):
Levelling feet
10
Publicité
Table des Matières
