Counter Configuration; Fine Tuning Of The Shooting Position - Cassese MACH 5 Mode D'emploi

USER MANUAL
6.B.b
In the execution screen, a counter (see Figure 4-21 and Figure 4-43) can be used.
-if the filed COUNTER DIVISOR is set to 1, the amount of corner will be displayed in the execution screen.
-if this field is set to 4 the amount of frame is displayed.
Set this parameter accordingly.
This parameter set at DEC MODE COUNT will set the counter in decrease mode,
counting backwards.
This parameter set at INC MODE COUNT will set the counter in increase mode,
counting upwards.
6.B.c
If the machine doesn't shoot in the right position, it is possible to calibrate it.
Applying +1 to OFFSET 45 will increase the position of all wedges of +1mm.
After touching that button, a code will be requested, enter 9059 at prompt. Once the
setting is done, turn off the machine to lock back the parameters.
Page 2: changing the language of the machine
It is possible to change the language from that page, press the flag several times until the
right language is displayed.
Page 2/7: counter configuration
Page 2/7: fine tuning of the shooting position
MACH 5 CART
Figure 6-11
Figure 6-12
Figure 6-13
Figure 6-14
34