Proper Usage; Technical Description - Dometic PERFECTVIEW Switch 300 Notice D'utilisation

Proper usage

Connections and controls
No. in
fig. 4, page 4
1
2
No. in
fig. 5, page 4
3
4
5
6
4 Proper usage
SWITCH300 is a control box that matches components from different reversing video systems to
each other. Up to three cameras can be connected to a monitor via SWITCH300.
5

Technical description

The control box SWITCH300 is used for the expansion of existing reversing video systems.
It possesses three separate controllable camera inputs, enabling e. g. operation with a reversing
and two side cameras or with three separate contollable cameras (for articulated buses, machine
monitoring etc.). In addition, for example, cameras that require different voltage can be
connected to each other.
Only one camera input is required on the monitor. The monitor can be automatically activated via
the corresponding control output.
All cameras can be activated manually. In addition, with corresponding cameras a mirror function
can be switched on so that the monitor picture corresponds to a view in the rear mirror.
The control box can be used with almost all cameras and monitors via various adapters
(accessories).
The control box can be connected to 12-V to 32-V DC voltage.
10
Description
Left (CA2)
Back (CA1)
Description
R L B (Mirror S/W)
DIN (Monitor)
RCA (Monitor)
Right (CA3)
Description
6-pin mini DIN socket
Connection for the left camera
6-pin mini DIN socket
Connection for the reversing camera
Description
DIP switch
Select mirror function
Monitor output
Connection for a monitor
Monitor output
Connection for a monitor with an A/V input
6-pin mini DIN socket
Connection for the right camera
SWITCH300
EN