Scope Of Delivery; Proper Use; Technical Description - Dometic WAECO AMP100 Instructions De Montage Et De Service

AMP100
3

Scope of delivery

No. in fig. 4,
page 5
1
2
–
–
–
4

Proper use

AMP100 (Item no. 9102200035) is a control box for connecting the WAECO camera
models CAM33 and CAM80 with motor-driven protective flaps to a monitor for use as a
rear view video system.
5

Technical description

AMP100 is used for connecting WAECO cameras CAM33 and CAM80 to a monitor with
a cinch video input (RCA). The control box supplies the control signal for the camera's
motor-driven protective cap and the activation signal for the monitor. It also ensures a
proper power supply for the camera.
In default mode, the camera is activated when you switch on the monitor or engage the
reverse gear. The monitor is also activated when you engage the reverse gear.
If a video source in addition to the camera, such as a navigation system or DVD player,
is connected to the monitor, you need to set and connect the control box accordingly. In
that case, the control signal for the camera protective cap is not triggered when you switch
on the monitor but only when you engage the reverse gear.
If you would then like to use the camera when the vehicle is parked or when driving for-
wards, you must install the supplied rocker switch.
The control box can be connected to 12-V to 24-V DC voltage.
Quantity Description
1 Control box with cable set
1 Rocker switch
1 Cinch cable
1 Installation material with cable
fasteners
1 Installation and operating instructions
Scope of delivery
Item number
RV-AMP-SW
19