Using the appliance
Temperature monitoring
A warning signal sounds and the temperature display flashes:
• if the inner temperature of a zone deviates from the set temperature by more
than 5 °C.
• if the power supply has been disconnected for a long time.
• if the door has not been shut properly.
• if the door is open for more than 60 seconds.
This prevents the temperature from falling or rising too much unnoticed, which could
affect the quality of the wine.
Once the unit has reached the set temperature, the warning signal stops and the
temperature display stops flashing.
To switch off the warning signal prematurely:
➤ Press the
button briefly
✓ The temperature display flashes until the set temperature is reached. The display
is then illuminated constantly and indicates that the alarm system is active again.
Using the Sabbath mode
In this mode, the display, interior lighting and warning signal for the temperature
monitor are deactivated. The refrigeration continues as usual.
To switch on the Sabbath mode:
➤ Press the
and
✓ The temperature indicator flashes 4 times. The Sabbath mode is activated. The
Sabbath mode switches off automatically after 96 hours.
To switch off the Sabbath mode:
➤ Press the
and
✓ The temperature indicator flashes 4 times. The Sabbath mode is deactivated. The
display, interior lighting and warning signal for the temperature monitor are acti-
vated.
22
.
buttons simultaneously for at least 5 seconds.
buttons simultaneously for at least 5 seconds.
MaCave
EN