Safety Warnings For Screwdrivers - Bosch PSR Select Notice Originale

Never service damaged battery packs. Service of battery packs should
u
only be performed by the manufacturer or authorized service providers.

Safety Warnings for Screwdrivers

Hold the power tool by insulated gripping surfaces, when performing
u
an operation where the fastener may contact hidden wiring. Fasten-
ers contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Use suitable detectors to determine if there are hidden supply lines
u
or contact the local utility company for assistance. Contact with elec-
tric cables can cause fire and electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes property damage.
Hold the power tool securely. When tightening and loosening screws be
u
prepared for temporarily high torque reactions.
Before any work on the tool (e.g. maintenance, tool change etc.) as
u
well as during transport and storage, set the rotational direction
switch to the middle position. There is risk of injury from unintentionally
pressing the on/off switch.
Secure the workpiece. A workpiece clamped with clamping devices or in
u
a vice is held more secure than by hand.
Always wait until the power tool has come to a complete stop before
u
placing it down. The application tool can jam and cause you to lose con-
trol of the power tool.
Safety instructions
This charger is not intended for use by chil-
u
dren or persons with physical, sensory or
mental limitations or a lack of experience or
knowledge. This charger can be used by
children aged 8 or older and by persons who
Bosch Power Tools
Protect the power tool against heat, e.g. against con-
tinuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
English | 27
1 609 92A 4M5 | (24.10.2018)