Promise Technology SuperTrak EX8760T Guide De Démarrage Rapide page 14

SuperTrak EX8760T, EX8768 Quick Start Guide
Installing onto Windows
This procedure installs WebPAM PRO and the Command Line Interface (CLI)
onto your Windows-based PC or Server. To install only the CLI, see Appendix E
of the SuperTrak User Manual on the Software CD.
Follow these steps to install WebPAM PRO onto your Windows-based PC or
Server:
1. Boot the PC or server, launch Windows, and log in as the Administrator.
If the computer is already running, exit all programs. If you are not logged in
as the Administrator, log out, then log in again as the Administrator.
2. Insert the Software CD into your CD-ROM drive.
The installer window opens automatically.
3. Click the WebPAM PRO Software button, then click the Install WebPAM
PRO for Windows button.
The first WebPAM PRO installation dialog box appears.
4. In the Introduction dialog box, click the Next button to proceed with
installation.
5. Follow the prompts in the installation dialog box.
Installing onto Linux
Follow these steps to install WebPAM PRO on your Linux-based PC or Server.
1. Boot the PC or server, log in as root, and launch the Linux GUI.
If the computer is already running, exit all programs. If you are not logged in
as root, log out, then log in again as root.
2. Insert the Software CD into your CD-ROM drive.
3. Go to the WebPAM PRO / Linux directory on the CD-ROM and copy the
WebPAMPRO...Linux.bin file to the root directory.
4. Open a terminal window and type sh followed by the exact name of the
./WebPAMPRO...Linux.bin file, then press Enter.
After several moments, the first WebPAM PRO installation dialog box
appears.
5. Follow the prompts in the installation dialog box.
If you have WebPAM or an earlier version of WebPAM PRO on
your PC or server, manually uninstall them before you install
WebPAM PRO from the Software CD.
Caution
14