TERMA MEG Mode D'emploi page 16

Problem solving
Problem
The device is plugged in,
no diodes are on.
Heating element is not
heating, outside diodes are
winking alternately.
Heating element is heating
despite turning it off with
the on/off button.
If the problem continues please contact Your local Distributor.
16
User manual MEG, DRY, MOA, REG 2, REG 3 www.termaheat.pl
Possible cause
Problem with the
connection.
Temperature sensor has
been damaged.
Overheating of device.
Damaged Electronics.
Solution
Check the connection of
the power wire, the plug
and the socket.
Disconnect the device
completely, wait until the
radiator cools down and
then re-connect it.
Check that the radia-
tor has been filled with
heating agent in the
proper manner, i.e. ac-
cording to the manufactur-
er's instructions.
Disconnect the device
completely, wait until the
radiator cools down and
then re-connect it.