Installation Sequence - Comunello Automation LIWIN Mode D'emploi

6. INSTALLATION
With bottom-hung windows, there is a danger of potential injury resulting from the window
accidentally falling.
It is OBLIGATORY to fit limiting arms (of the Series 1276 type), or an alternative safety system, of a
suitable size to prevent the window from accidentally falling down.
Top-hung outward opening window: Overall dimensions and fixing holes
27
27
Bottom-hung inward opening window: Overall dimensions and fixing holes
27
27

6.1 Installation sequence

- Check that the width of the window, where the actuator is due to be fitted, is more than 420 mm. Otherwise,
it is NOT POSSIBLE to fit the actuator.
- Check that the force required to open/close it (calculated according to the table under Point 4.2) is less
than or equal to that shown in the TECHNICAL DATA table.
- Try manually the window opening, checking for and if necessary eliminating any sticking points that could
cause a malfunction.
- Manually test the maximum opening of the window, checking that it is greater than the travel set by the
actuator.
54.4
54.4
Filo Serramento
Filo Serramento
325
325
414
414
414
414
325
325
41
41
27 99
27 99
106.3
106.3
27
27
Filo Serramento
Filo Serramento
99.5
99.5
55
55
29