Safety Instructions For Maintenance And Troubleshooting; Notes Regarding Special Types Of Hazard - Kemper MiniFil Notice De Montage

1.5 Safety instructions for maintenance and troubleshooting

Setting up, maintenance and repair work and troubleshooting must only be
performed when the product is switched off.
Always tighten bolt connections that have been loosened during repair work! If
specified, tighten the relevant bolts with a torque wrench.
In particular, clean connections and screw connections of dirt or care products at the
beginning of maintenance/repair/maintenance.
The time frames for periodic testing/inspections stipulated or specified in the
operating instructions must be observed.
Before disassembling, mark the parts that belong together.

1.6 Notes regarding special types of hazard

WARNING
Skin contact with cutting fumes, etc. can cause skin irritation in susceptible
individuals!
Repair and maintenance work on the product may only be carried out by trained
and authorized personnel while complying with safety rules and the applicable
accident prevention regulations!
Serious injury to the lungs and respiratory tract is possible!
In order to avoid contact with and inhalation of dust, use protective clothing,
gloves and a powered air respirator!
The release of hazardous dusts during repair and maintenance is to be avoided to
ensure that persons not charged with the task are not affected.
1502806-00 - 21 -
EN