Safety; Notes On Signs And Symbols - Kemper MiniFil Notice De Montage

1 Safety

1.1 General
The product is designed and built according to state-of-the-art technology and the
recognized safety rules and regulations. When operating the product, technical
hazards for the operator or impairment of the product as well as other property may
occur, if:
• it is not operated by trained or instructed personnel,
• it is not used for the purpose intended and/or
• it is not properly maintained.

1.2 Notes on Signs and Symbols

DANGER
This symbol in conjunction with the signal word "Danger" indicates imminent
danger. Non-adherence of the safety note leads to death or serious injuries.
WARNING
The symbol in conjunction with the signal word "Warning" indicates a potentially
dangerous situation. Non-adherence to the safety notice may lead to death or
serious injuries.
CAUTION
The symbol in conjunction with the signal word "caution" indicates a potentially
dangerous situation. Non-adherence of the safety note may lead to slight or
negligible injuries.
May also be used for warnings against property damage.
INFORMATION
The general information is simple additional information which does not warn
about personal injury or property damage.
1. Numbers with a full stop indicate lists of action steps for which the sequence is of
importance.
• Bullet points indicate lists of parts in a legend or instructions for which the
sequence is unimportant.
1502806-00 - 18 -
EN