Kenwood DRV-410 Mode D'emploi page 33

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Message
SD card requires formatting*
Formatting failed
Uncompatible SD card
Recording has stopped*
No space on the SD card
Event recording failed (file limit
exceeded)
Manual recording failed (file limit
exceeded)
Still image recording failed (file limit
exceeded)
• The SD card is not formatted in a format that can be recognized.
å
If necessary, refer to "Formatting an SD Card" and then format
the SD card with the device.
• The SD card has malfunctioned.
å
Replace the SD card with a new one. SD cards have a product
lifespan, such as the number of times that writing can be performed.
• An SD card with a capacity less than 8 GB or more than 32 GB is
inserted.
å
Refer to "Cards supported by this device" and then insert an
SD card that can be used with the device into the SD card slot.
( Á P.32)
• The SD card was removed during recording.
• Recording became no longer possible due to a failure of the SD card.
• Recording stopped due to some problem occurring.
• Recording may stop if an SD card of an incompatible speed class
is used.
å
Reinsert the SD card.
å
Replace the SD card with a new one.
å
Change the overwrite setting of the "Video recording settings".
( Á P.20)
å
Replace the SD card with a compatible one.
• The free space required to start continuous recording is not
available on the SD card.
• The free space required to record up to the file limit for manual
recording or event recording is not available.
å
Refer to "Protecting or Deleting Files" and then delete
( Á P.18)
unnecessary files.
å
Back up any necessary data to a PC or other device, refer to
"Formatting an SD Card, " and then format the SD card with the
( Á P.13)
device.
• "Overwrite (event)" is "OFF" and the file limit of the folder for event
recordings has been reached.
å
When "Overwrite (event)" is set to "ON, " old files are deleted to
( Á P.20)
record.
• "Overwrite (manual)" is "OFF" and the file limit of the folder for
manual recordings has been reached.
å
When "Overwrite (manual)" is set to "ON, " old files are deleted to
( Á P.20)
record.
• The file limit for still images has been reached.
å
Refer to "Protecting or Deleting Files" and then delete
( Á P.18)
unnecessary files.
Cause/Solution
( Á P.13)
29

Publicité

Table des Matières
loading

Table des Matières