Kenwood DRV-410 Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

File operations
1
Perform file operations such as selecting files
and backing up the SD card files to your PC.
SELECT
Select the <JVCKENWOOD>
FOLDER (S)
drive for the SD card.
Output a driving information file
EXPORT kmz/
(kml/kmz) that can be used with
kml (E)
the GoogleMaps
or GoogleEarth
Back up the SD card data to the
BACKUP (B)
hard disk of a PC, etc.
EXIT (X)
Exit the PC application.
Video playback screen selection
2
Display the top right, top left, bottom right,
or bottom left of the screen enlarged or
display an arbitrary location enlarged.
When the top right, top left,
bottom right, or bottom left of
the screen is displayed enlarged,
press this to retur n to the
normal screen.
Display the top right, top left,
bottom right, or bottom left of
the screen enlarged.
Move the displayed frame to
display an arbitrary location
enlarged to a maximum of five
times the size. Press [RESET] to
display at actual size (1x).
Selects the display language for
LANGUAGE
the MENU screen, etc.
SELECT UNITS Selects kilometer or mile display.
Selection tabs
3
Display a list of all files or display a list of
the event recording, manual recording, and
parking recording files. Select MAP to display a
map for the video currently playing.
4
TM
map service
TM
map service.
5
6
7
8
Video screen
Displays the video of the selected file.
Operate the playback bar to move to any
location. Also, double-click the video screen
during playback to switch to full screen
display. Each click of the screen during
full screen display switches between the
paused and playback states. Double-click
the screen to return to the normal screen.
Operation buttons
These buttons are for operations such as
playing and stopping video.
Displays the previous or next
frame of the video.
Displays the previous or next
file.
Stops playback.
Pressing this during playback
pauses playback. Pressing it
again resumes playback.
Captures an image at the point
pressed.
Indicates operating states such
as the playback state.
Changes the playback speed.
Adjusts the volume.
File list
Displays a list of the files and thumbnails
selected with a selection tab.
G-sensor chart
Displays waveforms of acceleration for
movement in the forward/backward (X), left/
right (Y), and up/down (Z) directions of the
vehicle.
Speed meter
Displays the speed of the vehicle.
25

Publicité

Table des Matières
loading

Table des Matières